Best Boost Pedals For Guitar -Top 5 Boost Pedal Reviews
Are you looking for a device that will help you boost your amp and provide you with a stronger range and louder, rich sounds? Then you are in need of a boost pedal. During the course of this article, we shall take a closer look at what boost pedals are. We shall also discuss why you need to purchase one, how to best use them for quality results, and we shall also talk about best boost pedals of 2017. Let’s get to it.
MXR M-133 Micro Amp
EarthQuaker Arrows Boost
TC Electronic Mini Booster
5.9 x 4.6 x 2.7 inches
6 x 3 x 2 inches
4.4 x 2.4 x 1.5 inches
4.4 x 2.4 x 1.5 inches
What is Boost Pedal & What does it do?
For those unfamiliar with these devices, boost pedals “boost” your sound by increasing amount of signal going into your amp and pushing the first gain stage harder. These devices do all this without muddying or over-driving your tone. If you are looking for a device that will enable your amps to produce extra volume, then a boost pedal is what you need. Clean booster pedals are essential to give you great and sustaining lead tone while still maintaining a clean signal. A clean booster provides a user with ample benefits that cannot be derived from an average overdrive pedal.
- You will achieve a smoother sounding clean overdrive that is near impossible to achieve with a standard overdrive pedal.
- It allows you to get a clean sounding solo boost which is very useful especially for blues and many other genre music styles.
- They are perfect for when your amplifier need a little boost to get you that fine tone – overdrive tend to color your tone a lot whereas clean boosts can be used to give your amplifier that push it needs to make your tone sound and feel great without coloring the tone.
Simply put, these items take sound of your guitar and make it bigger and louder – same way you use your guitar knob to enhance sound, these pedals push your sound further and louder. These items hike up your guitar’s signal before it reaches the amplifier without adding any distortion to the final sound – only signal level is increased.
How to use a Boost Pedal
Now that you have decided to purchase one for yourself, how do you use it? There are only two ways to use it. First way is by putting the pedal in front of your amp to make your sound bigger. When you are in a clean channel, this method will increase volume and add a sparking sound to your tune. When used in a distorted channel, you will experience more distortion emitting for your amp and your sound will have more sustain – however, when used in a distortion channel, you will not get any volume boost.
The second way to use it is by putting in the effects loop – put in the loop of the amplifier before any other pedals and your signal will hike up without any distortion. This method is best used by anyone looking to do nothing more than increase volume. Before making any purchase, we would recommend that you take a few things into consideration such as budget.
What is your budget? Money is a major thing to consider before buying best Boost Pedal. Try look for an item that within your price range, yet offers great features, making it the best value for your buck. You might get tempted to purchase a model that is way over your limit because it has more fantastic features, etc; but if you cannot afford it, we would recommend you leave it be for the time being. That being said, our list comprises of affordable models that will be within your price range – even for those individuals looking for cheapest yet quality and long lasting models.
Top 5 Best Boost Pedals 2017
1. MXR M- 133 Micro Amp
Performance and Ease of Use
For anyone who has researched about best boost pedals, then you have undoubtedly stumbled upon two repetitive brands; MXR Micro Amp and Xotic Effects EP Boosters. MXR M- 133 Micro is among the best there is on current market. This device is relatively easy to use. It is highly affordable and comes with great tone quality. When hunting for a great device, you need to always ensure that it is easy to use – you do not want to purchase something that will give you nothing but a hard time when you are trying to work it. MXR M- 133 Micro is a good option for both pros and entry-level individuals. It comes with an incredible build quality that is highly durable. This model is made with an all metal case that is basically indestructible.
MXR M- 133 Micro has a single on/ off foot switch and features true bypass ensuring that your sound does not get affected when pedal is off. This model has a ¼’’ input and output. Right next to this, you will find a 9V DC power supply. When you wish to adjust the gain, all you have to do is use a single large Gain knob. MXR M-133 also includes a large rubber washer that goes over this knob – this feature ensures that you have a better grip and easier operation when you need to adjust with your foot while playing.
Keep in mind that effects of such devices tends to vary depending on type of equipment you are using – especially your amplifier and guitar pickups. If you have been looking for a clean booster that will not affect any frequencies, then this is just the model you need.
MXR M-133 Micro is a simple pedal that aids in adding gain to your tone using one single control. It is also a great choice for mitigating signal drop off that you might experience when you use very long cables. All in all, MXR M-133 Micro is a great alternative that is pocket friendly, easy to use, and durable.
- Easy to use
- Provides user with unmatched volume and sound quality
- Highly durable
- Might not work too well when it is not equalized properly
- A single on/ off foot switch
- Features true bypass
- Has a ¼’’ input and output
- A single large Gain knob
- A 9V DC power supply
2. Xotic EP Booster
Ease of use and Performance
Xotic EP by Xotic Effects is also one of the most popular clean boosts available. Many past customers have nothing but praise regarding its ability to not only boost your volume but to add a bit of thickness to your tone as well. Xotic EP is also used by guitarists to shape their tone by clicking it on and off in conjunction with their overdrive pedals to clean up their output. Xotic EP has a small footprint and simple configurations that are easy to use. It comes inclusive of two DIP switches; one switch is a bass boost and the other is a Bright switch.
User friendly Interface
When switches are off, this setting is referred to as Vintage setting – this setting produces a mellow side. When Bright switch is turned on, this is the default setting where you will have access to extra oomph that helps greatly when your guitar and amp are darker. Once you flip on the Bass DIP switch, you will immediately notice that it increases up your single coils. If you are looking for best clean boost pedal that is most transparent and affordable, Xotic EP is just that. Xotic EP is an instant tone improver and can make even the dullest amplifier come back to life.
- Can last for a very long time when well taken care of and managed
- A great clean pedal for anyone looking for an affordable model that provides quality features
- Does not produce loud enough tones for anyone looking for extra loud music
- Internal Switches for Bass Boost and Bright
- Discrete FET Preamp
- Up to +20db of Gain
- 9-18v dc Operation
3. EarthQuaker Devices Arrows Boost
Here is a handmade pedal from EarthQuaker Devices. Arrows is a perfect solution for anyone struggling with sounds that are too muddy, too grungy, or too over saturated. Once you plug in Arrows, you will notice immediately how your sound will clean up but still have hints of the dirtiness effects chain without the muddiness that tends to accompany it.
Arrows is typically not marketed as a clean boost – however, it is extremely clean and can used as a standalone for your playing needs. Arrows is a very simple model that maintains your sound quality without disrupting pedals from your board. This model will give you necessary volume while still maintaining that clarity. If you want an amazing product that is affordable and long lasting, don’t even bother looking any further. Arrows has a lot of great options and sound that simply cannot be beaten by other models within the same price range.
- A perfect solution for anyone struggling with sounds that are too muddy, too grungy, or too over saturated
- Friendly user interface
- Will not provide loud tones as desired
- Some users have complained that assembly is not as easy
- Measures 4.37″ X 2.37″ X 1.5″ with knob
- Controls Level: Controls the volume
- Power 9v Battery or any standard 9 volt DC power supply with a negative center 2.1 mm barrel.
4. TC Electronic Spark Mini Booster
TC Electronic Spark Mini Booster is a basic model that comprises of only one knob and an on/ off switch. Since it’s a mini, it is very compact and does not require a lot of board space. For anyone looking for a neutral clean booster, then this is just what you need.
Clarity and Ease of Use
TC Electronic Spark Mini Booster will give you volume while still maintaining your tone’s clarity. Whether you plan to put it at the front or end of your chain, you can rest assured that it will provide you with a big sound that will cater to your specific needs.
- Easy assembly
- Ease of use
- Affordable & Durable
- Quality boosters
- Boost level knobs don’t have to turn very far to overpower your drive
- Discrete analog circuit with up to 20 dB of clean boost
- PrimeTime - seamless switching between latch and momentary modes
- Small footprint - will fit any pedalboard
5. Mooer Pure Boost, clean boost pedal
ZVex Super Hard On has the capabilities of injecting some serious character even in any basic guitar effects pedals. This model has an incredibly durable and quality build that looks great. You will have a relatively easy time setting it up and using it. ZVex Super Hard On has a foot switch that is located in the middle – it is used to switch effects on and off.
Durability and Custom interface
Just like all above mentioned model, Mooer Pure Boost, clean boost pedal comprises of a single knob that is used to increase/ decrease amount of boost. Mooer Pure Boost, clean boost pedal is affordable, long lasting, user friendly, and can be used by pros as well as entry level individuals.
- You will receive great performance from pedals
- Cuts through and gives a nice boost of volume when needed
- Simply awesome tones
- Construction is solid
- Small footprint on your pedals
- EQ levels and gain knob might be a bit tricky
- Pedal tends to color your original tone differently
- Cost is a bit stiff when compared to other MXR products
- 20db+ clean boost with more than 15db 2 band EQ
- Full metal shell
- Very compact and exquisite
- Great for conserving pedal board space
- True bypass
A transparent and clean boost pedal can be really useful for sound. As mentioned earlier, a user will have access to tons of benefits that would have been otherwise impossible to achieve such as bigger and louder sounds. Clean boosts pedals are able to hike up your guitars signal with little to no tone coloration –and with little to no distortion.
If you are a country guitar player or you enjoy playing blues, then these above mentioned devices are essential if you want to achieve a great lead tone while still managing to maintain clean signal. But do keep in mind that a pedal itself will not be able to provide you with highest level of performance as there are other things to consider such as the pickups in your guitar and types of amplifiers that you use. When these three are in symphony, you will experience quality tones like never before.
Have you ever used any of these above mentioned brands? How was your experience? We would love to hear from you so do leave a comment below and let us know which one word best for you and why. Also, if you have any questions regarding our top picks, do not hesitate to leave your queries below and we shall get back to you as soon as possible.